Ryobi ROBOYAGI Guía De Resolución De Problemas página 8

Tabla de contenido
Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 41
65 - 68, 85
73 - 80
81 - 83
84
86
114
117
118
97-169
6
English
Original Instructions
My height adjust is jammed.
My left / right wheel is jammed.
My cutting disc is jammed.
My perimeter trimmer is jammed.
Trimmer starter failure
Unexpected movement of rear
wheels
Unexpected movement of right
rear wheel
Unexpected movement of left rear
wheel
Critical Error
Turn off the mower, remove the battery pack, and remove
any blockages between the blade disc and housing.
Reinstall the battery pack and cover, turn on the mower,
and start the cutting program.
If issue persists, contact an authorised RYOBI service
centre.
Turn off the mower, remove battery pack, and clear the
wheel axle of any debris.
Reinstall the battery pack and cover, turn on the mower,
and start the cutting program.
If issue persists, contact an authorised RYOBI service
centre.
Turn off the mower, remove the battery pack, and remove
any blockages between the blade disc and housing.
Reinstall the battery pack and cover, turn on the mower,
and start the cutting program.
If issue persists, contact an authorised RYOBI service
centre.
Turn off the mower, remove the battery pack, and clean the
perimeter trimmer.
Reinstall the battery pack and cover, turn on the mower,
and start the cutting program.
If issue persists, contact an authorised RYOBI service
centre.
Ensure that Perimeter Trimmer is enabled in the Mower
Menu.
Turn off the mower, remove the battery pack, and clean the
perimeter trimmer.
Reinstall the perimeter trimmer.
Reinstall the battery pack and cover, turn on the mower,
and start the cutting program.
If issue persists, contact an authorised RYOBI service
centre.
Lift up the mower and make sure that the wheels do not
touch the ground. Move the mower from one area to
another area. If the rear wheel touches he ground, the rear
wheels turn and generate electricity.
The mower slipped down a slope. Check and ensure that
the slope is not greater than 20°.
Lift up the mower and make sure that the wheels do not
touch the ground. Move the mower from one area to
another area. If the rear wheel touches he ground, the rear
wheels turn and generate electricity.
The mower slipped down a slope. Check and ensure that
the slope is not greater than 20°.
Lift up the mower and make sure that the wheels do not
touch the ground. Move the mower from one area to
another area. If the rear wheel touches he ground, the rear
wheels turn and generate electricity.
The mower slipped down a slope. Check and ensure that
the slope is not greater than 20°.
Restart the mower (turn off, then turn on).
If issue persists, contact an authorised RYOBI service
centre.
Tabla de contenido
loading

Tabla de contenido