Fossil 515.2 Manual Del Usuario página 7

6 . to complete setting
7 . Press D to start/stop timer
8 . Press C to reset
DUAL TIME
In the "Dual Time' mode, press and hold C for 2 seconds to select "minutes"
setting; Press B to select "hours" setting, Press D to adjust the flashing item;
Press C to finish setting and to exit setting mode .
Digital
QBJF327
(Light/Set) A
(Mode) B
OVERVIEW
Features include CALENDAR, ALARM, 12/24H FORMAT, CHRONO, TIMER, DUAL
TIME, EL BACKLIGHT .
TIME SETTING
1 . Press and hold A for 2 seconds to enter time setting mode . Press B to cycle
through the settings . In any setting mode, if you do not press any button within 30
seconds, the watch will automatically exit from that setting mode and return to the
'TIME' screen .
2 . LIGHT
- In this mode you can turn the EL backlight on/off by pressing C or D . If
you have it set to 'LIGHT ON' the icon 'AEL' will display on the screen . If you have it
'LIGHT OFF'
set to press A to activate EL backlight as needed . Press B to set and
advance to next setting value .
3 . CHIME - In this mode you can turn the chime on/off by pressing C or D . If you have
it set to 'CHIME ON' the icon 'CHM' will display on the screen and the chime will
sound every hour . Press B to set and advance to next setting value .
4 . TIME - Press C or D to select 24-hour or 12-hour clock . Press B to set and
advance to next setting value .
5 . Press C to decrease and D to increase the hours . Press B to set and advance to
next setting value . Repeat for minutes, seconds, year, and day/date format .
6 . Press A to exit from setting mode . Once you have exited from setting mode you can
press C to turn on/off 'KET' which is the button tone .
12
D (Start/Stop)
P
C (Reset)
ALM
T2
CHRONOGRAPH
1 . Press B until 'CHRONO' appears .
2 . Press D to start/stop the chronograph .
3 . When running, press C to enter 'LAP' mode . 'LAP' time will display on the screen for
8 seconds . When stopped, press A to enter the memory mode then press A again
to view LAP record data . Press C key to exit the memory mode .
4 . To clear all previous records stop chronograph' . Press and hold C for 2 seconds .
TIMER MODE
1 . The display range of the timer is 23 hours, 59 minutes, and 59 seconds .
2 . Press B until 'TIMER' appears .
3 . There are three timer modes:
• CD-STP - When the countdown time is over the chime will sound for 30
seconds and then return to time setting .
• CD-REP - The timer will repeat up to 100 times . The chime will sound after
every repetition . When the number of repetitions is completed the chime will
sound for 30 seconds and then return to time setting .
• CD-UP - When the countdown time is over the chime will sound for 30 seconds
and then switch to begin counting up .
4 . Press and hold A for 2 seconds to enter the timer setting screen . Press C or D to
select the countdown type . Press B to set and advance to next setting value
5 . Press C to decrease and D to increase the hours . Press B to set and advance to
next setting value . Repeat for minutes and seconds .
6 . Press A to exit from the setting screen .
7 . Press D to start/stop timer .
8 . Press C to reset .
ALARM
1 . Press B until 'Alarm' appears .
2 . Press D to display 4 sets of alarm clocks .
3 . Press and hold A for 2 seconds to set the alarm .
4 . Press C to decrease and D to increase the hours . Press B to set and advance to
next setting value . Repeat for minutes .
5 . Press A to exit from the setting screen .
6 . Press C to turn alarm on/off .
7 . When the alarm is on, chime will sound for 30 seconds . Press any button to stop .
DUAL TIME
Press and hold D for 2 seconds to enter the 'Dual Time Mode' . 'T2' will appear on
your screen . Press and hold A for 2 seconds to enter the dual time setting screen .
Press C to decrease and D to increase the time zone setting range . Press A to exit
from the setting screen .
13