Cleaning Modes - Mellerware Tidy! Random Manual Del Usuario

Tabla de contenido
Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 18
the robot manually in the charging
base so that it can be recharged
correctly.
STOP THE ROBOT
To stop the robot, press the on/off
button (C) or the start/stop button
(4) on the remote control.
To resume the cleaning cycle, press
the on/off button (C) or the on/off
button (4) on the remote control
again.
To return the robot to the charging
base (11) press button (2).
TURN OFF THE ROBOT
To turn off the robot, keep the
on/off button (C) pressed for a
few seconds until the operation
indicator goes off .

Cleaning modes

AUTO CLEANING MODE
The robot starts to vacuum
automatically and combines the
diff erent cleaning modes in one
optimizing the cleaning of your
home to the maximum.
To use the AUTO cleaning mode,
press (1) button from the remote
control.
When the cleaning cycle ends or
if the battery runs out, it returns to
the charging base automatically.
SPIRAL CLEANING MODE
The robot starts vacuum at a
particular point by spiraling
outward approximately (1 meter) in
diameter and then spiraling inward
to where it started.
To use the SPIRAL cleaning mode,
press the (7) button from the
remote control.
MAX CLEANING MODE
The robot increases its suction
power to provide a deeper
cleaning.
To use the MAX cleaning mode,
press the (10) button from the
remote control.
EN
Tabla de contenido
loading

Tabla de contenido