Led Indicator - Mellerware Tidy! Random Manual Del Usuario

Press the (4) button to complete
–
the configuration. The robot will
beep.
CANCEL SCHEDULE SETTING
Press the (6) button from the remote
–
control for 4 seconds, the robot will
beep when the cleaning schedule
confirmation is canceled.

Led indicator

LED indicator Robot Status
Flashing Charging the
blue light battery
Fixed blue light Resting/On
going/Charge
completed
Fixed pink light Low battery
and return to
automatic
charging base
OFF The robot is off.
To save energy,
the light
automatically
turns off when
the robot is not
attached to the
charging base
and has been idle
for 1 minute
Fixed red light/ The robot has
flashing + an error. See
Beep the "Anomalies"
section in this
manual for
solutions.
Cleaning
Disconnect the battery charger
–
from the mains and allow it to cool
before undertaking any cleaning
task.
Clean the equipment with a damp
–
cloth with a few drops of washing
up liquid and then dry.
Do not use solvents, or products
–
with an acid or base pH such as
bleach, or abrasive products, for
cleaning the appliance.
Do not let water or any other liquid
–
get into the air vents to avoid
damage to the inner parts of the
appliance.
Never submerge the appliance in
–
water or any other liquid or place it
under running water.
Never submerge the connector in
–
water or any other liquid or place it
under running water.
TIDY! Cleaning Replacement
Random
Dust After
tank each use
Filters Once a
week
Rotary Once a
brush week
Side Once a
brushes month
Sensors Once a
month
EN
frequency
-
Every 2
months
Every 6-12
months
Every 3-6
months or
when they
are visibly
deteriorated
-