Emptying The Dust Tank; Cleaning The Filters; Brush Cleaning - Mellerware Broomy! Manual Del Usuario

The button can be locked to avoid
–
having to hold it during the entire
use of the appliance (slide up).
The battery indicator light will
–
illuminate.
Select the power using the MAX
–
button (B).
ONCE YOU HAVE FINISHED USING
THE APPLIANCE
Stop the appliance by releasing
–
the on/off button or by unlocking
the button (slide down).
Clean the appliance.
–
Cleaning
Disconnect the battery charger
–
from the mains and allow it to
cool before undertaking any
cleaning task.
Clean the equipment with a damp
–
cloth with a few drops of washing-
up liquid and then dry.
Do not use solvents, or products
–
with an acid or base pH such as
bleach, or abrasive products, for
cleaning the appliance.
Never submerge the appliance in
–
water or any other liquid or place it
under running water.

EMPTYING THE DUST TANK

Empty the dust box when it is –
full (observation facilitated by
transparent windows), or when
vacuuming power is notably
reduced.
Release the extension tube from
–
the motor body.
Open the dust tank cover (E)
–
and pour its contents into an
appropriate waste container.
Close the dust tank cover.
–

CLEANING THE FILTERS

Press button (C) to release the dust
–
tank from the appliance handle.
Open the dust container (Fig.5).
–
Take out the HEPA filter and then
–
the air entry filter.
Wash the filters and dry.
–
Once the filters are dry, put all the
–
parts back together. Close the dust
tank and join it to the handle of
the device.
For the air entry filter, it is advisable
–
to be changed at least once a year
or every 50 hours of the appliance's
use.
For the air outlet HEPA filter (high
–
efficiency air filter that efficiently
retains spores, ash, sawdust,
pollen...), it is advisable to change
it a least once a year or after every
50 hours of use.

BRUSH CLEANING

Rotate the motorized brush to
–
access to the brush. Push the tab
on the left side of the brush to the
left (Fig.6).
Lift the brush from the housing
–
and clean.
Place the brush back on the
–
motorized brush by first aligning
the end of the hexagon on the right
end of the brush. Then insert the
other end into place and press the
tab to lock the brush.
EN