Mellerware Tidy! Random Manual Del Usuario página 10

EDGE CLEANING MODE
Once the robot fi nishes cleaning
–
the open areas of your fl oor, use
the perimeter mode to make sure
it has been cleaned along the
walls and around the legs of the
furniture.
To use the EDGE cleaning mode,
–
press the (8) button from the
remote control.
ROOM CLEANING MODE
When it is necessary to clean a
–
specifi c room, press the ROOM
cleaning mode button from the
remote control (9).
When the cleaning is fi nished, the
–
robot will stop.
Make sure to close the doors of the
–
room while using this mode.
BACK TO THE CHARGING BASE
The robot automatically returns to
–
the charging base when it detects
that it only has 15% of the battery
left.
To activate this option, press the (2)
–
button from the remote control.
WATER TANK MODE
At the end of the vacuuming
–
process, you can change the
dust tank for the water tank (V) to
continue cleaning. The water tank
works by dripping so the mop will
gradually moisten and scrub the
fl oor.
Open the hermetic lid of the tank
–
(W) and introduce water into the
tank.
Add the mop on and make sure it is
–
secure.
EN