Idiomas disponibles
Idiomas disponibles
8
22. Locate terminal 3 (G70 circuit) slot/cavity (3) of the
connector housing's mating side.
23. Route the Purple/White wire (1) from the hood switch
harness through the secondary lock, through the
weather seal and into the terminal 3 (G70 circuit) slot
of the connector housing's wiring side.
24. Reinstall the front portion of the connector, making
sure that all terminals are seated correctly and are in
the right direction. Reinstall the weather seal and the
secondary lock.
NOTE: Totally Integrated power module electrical con
nectors are color coded to ease location reference.
25. Connect the electrical connector by pushing straight
on and rotating the connector arm inboard, until the
connector is firmly locked in place on the TIPM as
sembly.
26. Turn the TIPM so that the connector side is facing
down. Install the assembly onto the TIPM battery tray
bracket making sure to line up the lower retaining tab
with the retaining slot in the tray .
27. Push the TIPM (1) downward to lock the upper retain
ing clips into the bracket (2).
Jun 21, 2010
4280312
K6861080
