Idiomas disponibles
Idiomas disponibles
1. Connect a battery charger to the vehicle.
2. With the wiTECH diagnostic application, perform the following steps:
• Select the "DIAGNOSTIC PROCEDURES" tab
• Highlight "RESET ECU"
• Select "RADIO FREQUENCY MODULE (RFH)"
• Note OnScreen instructions and select the "NEXT" button
• Select "CLOSE"
1. Sit in the driver seat and close all doors.
2. Lower the window part of the way down.
3. Run the window to the full up position and continue to hold the switch for an additional two seconds.
4. Run the window to the full down position and continue to hold the switch for an additional two seconds.
5. Raise the window to the full up position.
6. Repeat the steps for the remaining windows.
1. Connect a battery charger to the vehicle.
2. With the wiTECH diagnostic application, perform the following steps:
• Select "BODY CONTROL MODULE (BCM)"
• Select the "MISC FUNCTIONS" tab
• Highlight and select "TEMPORARY REMOTE START DISABLE"
• Note on-screen instructions and select the "CONTINUE" button
• Follow on-screen prompts and select the “SAVE” button, then the "CONTINUE" button
• When complete, select “CLOSE”
8/1/14
www.mopar.com
15
