Kruger KH4014F Manual De Uso Y Manutención página 6

1) Check the oil level that must be always higher than the rod notch.
3) If the electric current characteristics (Volt/Hz) correspond to those stated
on the label fixed to the machine, you can insert the plug. The use of
extensions and loose plugs not to standards is prohibited. The
electrical system the machine is connected to must be made in
conformity with the laws in force in the Country of installation. It is
recommended to have a differential thermomagnetic switch with
sensitivity equal to 30 m A upstream from the power socket.
A
INSTALLATION
C
B
4) Connect the water supply hose (the
2) Connect the high pressure hose to
the outlet fitting (B), tightening the
ferrule completely and the other
end to the automatic gun (C).
CAUTION:
The earth connection is compulsory.
inner diameter must be not smaller
than 14 mm) to the pump inlet fitting
(A). Make sure that the suction filter
of the suction fitting is always
clean.The dirty filter causes a bad
water supply and consequently a
very bad pump operation
inevitable risk of a rapid wearing
out and breakage of the internal
mechanisms.
KH4014F-KH3018F
with the