Maxon C2 Instrucciones página 22

INSTALLING CAMERA AND SENSORS (IF EQUIPPED) - Continued
4. Adjust camera angle (FIG. 22-1) by
bending camera mounting bracket until
image on backup camera display screen
adheres to standard in FMVSS 111.
5. Install each of the OEM sensors (if
equipped) into 4 brackets as shown
in FIGS. 22-2 & 22-2A.
6. Use plastic ties (Kit items) to se-
cure sensors to mounting brackets
as shown in FIG. 22-2A.
7. Connect OEM sensor harness on
the vehicle to all sensors.
LIFT CORPORATION Sht. 22 of 55 DSG#
OEM SENSOR
(4 PLACES)
CAMERA MOUNTING
BRACKET AND OEM
CAMERA
+/- 40° TILT
ADJUSTING CAMERA ANGLE
OEM SENSOR
SENSOR MOUNTING
BRACKET
SENSOR MOUNTING
BRACKET
(4 PLACES)
INSTALLING SENSORS (IF EQUIPPED)
FIG. 22-2
M-15-02
Rev. E Date: 09/13/21
FIG. 22-1
FIG. 22-2A
PLASTIC
TIE