Maxon C2 Instrucciones página 10

NOTE: Ensure vehicle is parked on level ground and parking brake is set before install-
ing Liftgate.
1. While mounting Liftgate on vehicle body, en-
sure Liftgate is positioned so platform will land
level to the ground.
• If mounting position is incorrect (FIG. 10-1),
tip of platform may not touch the
ground.
• If mounting position is correct (FIG. 10-2),
tip of platform will touch the
ground when platform rests on the
ground. There may be a small gap be-
tween top of the columns and truck body.
2. Center Liftgate on the rear opening in the
vehicle body. Ensure top of the main frame
housing is fl ush with fl oor of the vehicle
body (FIG. 10-2).
LIFT CORPORATION Sht. 10 of 55 DSG#
POSITIONING LIFTGATE ON TRUCK BODY
M-15-02
TIP OF PLATFORM
(SMALL GAP)
"D"
COLUMNS LEVEL WITH TRUCK BODY
(INCORRECT)
RH COLUMN
(SMALL GAP)
MAIN FRAME
HOUSING (TOP)
TIP OF PLATFORM
(TOUCHES GROUND)
PLATFORM LEVEL WITH THE GROUND
(CORRECT)
Rev. E Date: 09/13/21
RH COLUMN
(NO GAP)
FIG. 10-1
FLOOR
"D"
FIG. 10-2