Conducting The Test; Preparing The Necessary Materials; Measurement Procedure; Turning The Meter On - iLine microsystems microINR Instrucciones De Uso

identifies failures when processing the sample during the test,
as well as proper pre-analytical treatment of the sample.
Level 3 - Control channel
• Control channel provides highly controlled clotting times.
System reliability is assured when control clotting time lies
within a pre-defined range.
PROFESSIONAL USE:
Liquid control:
The microINR system has a number of on-board quality
control functions integrated into the Meter and the Chip and
therefore there is no need to run quality control tests with
liquid quality controls. However, iLine Microsystems has
available an optional liquid control (plasma) for the microINR
system. This control is provided to help meet the regulatory
requirements applicable to your facility. To purchase, contact
your local distributor.

3. CONDUCTING THE TEST

3.1 PREPARING THE NECESSARY MATERIALS

• microINR Meter
• microINR Chips CHB0001UU (not supplied)
• Fingersticking material
- Professional use: disposable lancets (not supplied)
- Self-testing: lancing device and lancets (exclusive
Reference Kit KTA0001XX)
• Skin cleaning material (not supplied)
Always use CE marked lancing devices and lancets.

3.2 MEASUREMENT PROCEDURE

Turning the Meter On

The Meter can be turned on:
- By inserting the Chip:

Inserting the Chip

Verify the expiry date and the storage conditions of the
Chip before conducting the test..
• Open the pouch.
08
- By pressing any button: