Cleaning Of Working Materials, The Work Place And Tool; Disposal - Parkside PMS 130 Instrucciones Para El Manejo Y La Seguridad

Operation/Cleaning/Disposal
Switching on and off:
Caution! Before connecting to the electricity supply, ensure that the palm detail sander is switched
off (switch is in position "0").
Switching on:
Switching off:

Cleaning of working materials, the work place and tool

· Vacuum the all the surfaces in the working area immediately after finishing work and thoroughly
clean them.
· Change the dust bag and the filter on the special suction device regularly.
· Thoroughly clean any items covered with dust before you use them again.
Caution! Before starting any work on the palm detail sander, make sure that the tool is switched off
and the mains plug is out of the socket.
Always keep the tool and the ventilation slots clean.
This will maximise the service life of the tool and ensure your safety.
Clean the sander frequently; for best results, do this immediately after you have finished using it.
Do not allow any liquids to enter the sander. Use a soft cloth to clean the housing. Never use petrol,
solvents or cleaning agents that might attack plastic.

Disposal

· The packaging consists entirely of environmentally-friendly materials. It can be disposed of at your
local recycling facility.
· Contact your local refuse disposal authority for more details of how to dispose of your sander.
14 GB
PARKSIDE
push the On/Off switch
push the On/Off switch
downwards into position "1".
upwards into position "0".