Functional Description; Intended Use; Product Features - Bosch PCM 8 S Manual Original

38 | English

Functional Description

Read all safety warnings and all in-
structions. Failure to follow the
warnings and instructions may re-
sult in electric shock, fire and/or se-
rious injury.

Intended Use

The power tool is intended as a stationary ma-
chine for making straight lengthways and cross-
ways cuts in wood. Horizontal mitre angles of
–47° to +53° as well as vertical bevel angles of
0° to 45° are possible.
The machine is designed with sufficient capacity
for sawing hard and softwood as well as press
and particle board.

Product Features

The numbering of the components shown refers
to the representation of the power tool on the
graphic pages.
1 Dust bag
2 Sawdust ejector
3 Cable holder
4 Button for releasing the tool arm
5 Handle
6 Blade guard
7 Retracting blade guard
8 Saw blade
9 Roller
10 Fence
11 Holes for quick-action clamp
12 Insert plates
13 Locking knob for various mitre angles
(horizontal)
14 Angle indicator (horizontal)
15 Scale for mitre angle (horizontal)
16 Mounting holes
17 Saw table
18 Drill holes for extension bars
19 Extension bar
20 Allen key (size 6 mm)/Phillips screwdriver
21 Stop screw for 45° bevel angle (vertical)
1 609 929 U68 | (23/10/09)
22 Stop screw for 0° bevel angle (vertical)
23 Laser unit
24 Lighting unit (Power Light)
25 Slide device
26 Transport handle
27 Laser warning label
28 Switch for light ("LED")
29 Switch for marking of cutting line ("Laser")
30 Depth stop
31 Clamping lever for various bevel angles
(vertical)
32 Locking screw for slide device
33 Allen screws (6 mm) of the fence
34 Recessed grips
35 Transport safety-lock
36 Battery compartment
37 On/Off switch
38 Length stop
39 Saw table extension
40 Fastening kit for extension bar
41 Casing fin
42 Base unit*
43 Fastening kit for "base unit"*
44 Spindle lock
45 Allen screw (size 6 mm) for mounting of saw
blade
46 Clamping flange
47 Interior clamping flange
48 Wing nut for locking of the saw-table exten-
sion
49 Quick-action clamp
50 Quick-release button
51 Locking knob of the quick-action clamp
52 Wing nut of the quick-action clamp
53 Angle indicator (vertical)
54 Wing nut for locking of the length stop
55 Lock nuts of the depth stop
56 Stop nut of the depth stop
57 Casing stop for depth stop
58 Screws for insert plate
59 Cover
60 Knurled screw
Bosch Power Tools