Start-Up Status - Cadel EASY CONNECT PLUS Mithos Plus 14 Manual De Instalacion Y Uso

You can see the ON button
Caution! The button must only be pressed once to relay the ON command to the product. You
must then wait for the stove switch-on stages to be completed.
FOR SAFETY PURPOSES, REMOTE COMMANDS CANNOT BE SENT DURING CRITICAL ON/OFF STAGES.
7.1

START-UP STATUS

The word ON will appear on the stove panel with a flashing flame during the start-up stage.
The stove will have reached the operating condition when the flame stops flashing.
The start-up stage in the Easy Connect Plus application consists of 4 stages:
EN - EASY CONNECT PLUS
ACTUAL POWER - if it is ON, the actual operating POWER is displayed
T EXT - if the stove is connected to an external thermostat, the temperature is no longer control-
led via the app
WATER T. - this is the water temperature in the boiler/stove
(only for hydro models)
PUFFER T. - this is the water temperature in the puffer (if present)
(only for hydro models)
STORAGE T. - this is the water temperature in the storage tank (if present)
(only for hydro models)
of the stove on the INFORMATION screen, at the bottom right.
IGNITION
FLAME STANDBY
START
WORK ON
EN
63