Idiomas disponibles
Idiomas disponibles
5
STOVE MANAGEMENT VIA WIFI
This setup allows you to manage the stove via WiFi, from any connected device.
5.1
CONNECTION PROCEDURE FROM CONTROL PANEL
It is advisable to use this quick setup procedure from the control panel if the home router/modem has WPS.
WPS makes it possible to associate wireless devices for Internet connection, without using a physical connection (cables) to the
router but thanks to data transmission via radio waves, just by pressing a button on the router (or other device).
Follow the procedure below:
• press the "MENU" button
• scroll with the arrows until "WiFi/BLE" is displayed
• confirm with "MENU"
• scroll with the arrows and find "WiFi WPS"
• press "MENU"
• the "WPS ENROLEE" connection countdown starts
• during the countdown, press the "WPS" button on the router and wait for the end of the count for the connection.
Note: Refer to the instructions of your home router to activate WPS.
• Wait until "CONNECTED CLOUD" is displayed
• press "ESC" twice to exit the control.
A "cloud" will be displayed at the top left next to the time to indicate that the device is connected.
Now continue setting up from the app.
5.2
CONNECTION PROCEDURE VIA WIFI OR VIA BLUETOOTH
This configuration allows you to manage the stove via WIFI, from any connected device.
It can be configured in 2 ways:
• via WIFI (see CONFIGURATION VIA WIFI a pag. 59)
• via BLUETOOTH (see CONFIGURATION VIA BLUETOOTH (BLE) a pag. 61).
5.2.1
CONFIGURATION VIA WIFI
• The "CONFIGURATION" screen appears (see Fig. 8).
• Tap "CONFIGURE VIA WI-FI"" (see Fig. 8).
• The "NAVEL CONNECTION" screen appears (see Fig. 9).
• Tap on the dropdown menu of the smartphone, press and hold the "WIFI" icon (see Fig. 10).
• "ENABLE WIFI" to be able to select the network "NAVEL_XXXXXX" (see Fig. 11).
• Select network "NAVEL_XXXXXX" (see Fig. 12).
Fig. 8 - Configuration
EN - EASY CONNECT PLUS
EN
Fig. 9 - "NAVEL_XXXXXX" connection
Fig. 10 - Dropdown menu
59
Capítulos
