Idiomas disponibles
Idiomas disponibles
SIARR
08 - 99
PREPARATION
* Remove bumpers, then remove and eliminate the two
fixing leads holding the bumpers (point W).
ASSEMBLY
* Take and screw, without tighthening, the fixing arms A and B
to point W, insert at the extremity of the arms the welded
strip (C) to point X with the assembled screws
* Fix the device to points U-V with assembled screws U-V.
* Remount the bumpers to point Y using screw Y
* Tighten the whole to the frame indicated here below in
the following, order : W - X - U - V - Y.
FASTENING KIT
2 off HM12x40 screws
U
2 off DEC12 washers
2 off HM12x40 screws
V
2 off DEC12 washers
2 off HM12 nuts
4 off HM12x35 screws 150
W
4 off DEC12 washers
M16
AC8.8
19,5daNm
M12
M16
AC10.9
27,5daNm
M10
M12
AC8.8
8,1daNm
M10
ASSEMBLY INSTRUCTIONS
2 welded strips (C)
X
2 off HM12 nuts
2 off DEC12 washers
4 off HM8x20 screws
Y
4 off HM8 nuts
4 off DEC12 washers
2 off HM16x45 screws
Z
2 off DEC16 washers
2 off HM16 nuts
TORQUES :
AC10.9 11,4daNm
M8
AC8.8
AC8.8
4,7daNm
M8
AC10.9
AC10.9
6,7daNm
Affix the sticker in the position
!
Type
Type
SI041
Approval No.
Tow bar for
Ford Ranger II et e24*94/20*00*0071
Mazda BT50
NB : Electrical diagram inside our universal or custom wiring kits.
PLEASE NOTE : (to familiarise yourself with the operating charasteristics refer to the log)
2,3daNm
If this tow bar is fitted in accordance with our recommendations it will give a complete-
3,3daNm
ly satisfaction. We cannot accept any responsability in the event of changes to or
improper use of this item.
FICHIER : BUREAU\NOTICEDEMONTAGE\SIARR\NDM08\NDM0899-A - FOLIO NDMANG
307376600001
Max. Total
Max. Total
Authori. Weight Towable Weight
3 070 kg
3 000 kg
!
Max. Verti-
Value
cal load
D
150 kg
14,88 kN
