Nuna mixx Instrucciones página 15

Canopy Features
1 Pull the dream drape
it to the two sides of carry cot with magnets.
2 Fold the rear panel of the carry cot canopy upwards for more
ventilation.
Attach Carry Cot onto Chassis
1 Place the carry cot directly down until it latches into place.
2 The carry cot is securely attached with a positive "click".
!
Always remove the pushchair seat before using the carry cot.
!
Please do not fold the pushchair when the carry cot is still attached.
3 The carry cot can be used with MIXX pushchair.
Remove Carry Cot
Press each release side button as shown
simultaneously.
Use Rain Cover
To assemble the carry cot rain cover, place it over the carry cot, and attach
the 2 pairs of hook and loop fasteners on the front of rain cover.
!
Please always check ventilation, especially in hot weather when
the rain cover is on the product.
!
Please check that the rain cover has been cleaned and dried before
folding.
14
out from under the carry cot canopy, then secure
™
(18)
(16)(17)
(21) , while lifting up the handle
(19)
(20)
(22)