Siemens HiPath 3000 V7 Serie Manual De Servicio página 1101

2.1.2.3 optiPoint 410/420 V5 R3
Application Function
H.323 (oP410) General term for H.323 functions
H.323 Call Signaling
(oP410) active Voice
.
over IP:
Verbindungssteuerung
H.323 Call Signaling
(oP410) passive Voice
.
over IP:
Verbindungssteuerung
H.323 Payload
Transport (oP4x0 at
. H2k/H3k) active Voice
over IP: Uebertragung
der Sprachpakete
H.323 Payload
Transport (oP4x0 at
H2k/H3k) passive
.
Voice over IP:
Uebertragung der
Sprachpakete
H.323 Payload
Transport (oP4x0 at
. H4k) active Voice over
IP: Uebertragung der
Sprachpakete
H.323 Payload
Transport (oP4x0 at
. H4k) passive Voice
over IP: Uebertragung
der Sprachpakete
HFA (oP410) Hicom Feature Access
CorNet TC Logon
. (oP600) CorNet TC
Logon Port
OAM (oP410 HFA) Administration of optiPoint HFA devices
DLS Workpoint
Interface (client sided)
. workpoint sided DLS
Communication
interface workpoints
FTP_Server_Control
.
(oP410) FTP-Server
HTTPS_Server
(Phones) Secure
.
Embedded Web
Server
HTTP_Server
. (Phones) Web
Interface
IP-Config (Phones) IP
.
Configuration Services
th
Issue: 18 April 2007
Siemens Enterprise Communications GmbH & Co KG
M-
Type A-Prot.
Prot. Prot.
H.323
client (H.225- ---
Q.931)
H.323
server ---
(H.225-
Q.931)
client RTP_RTCP ---
server RTP_RTCP ---
client RTP_RTCP ---
server RTP_RTCP ---
client *proprietary* ---
client WPIP HTTPS TCP
server FTP ---
server HTTP ---
server TFTP ---
server *proprietary* ---
Product Specific Attributes
T- D- A-
Ports Ports
1024 -
TCP Def: Ephemeral Ports (IANA)
65535
0 -
TCP 1720 Def: H.225/Q.931
65535
Def: RTP portnumber is negotiated via
H.245. Max 5 connections: RTP starts at
5004 - 0 - <adr> port2/max - 1 down to <adr> port
UDP
5013 65534 1/min , RTCP at <adr> port2/max down to
<adr> port 1/min+1
Adm: even port number only
Def: RTP portnumber is negotiated via
5004 - 0 - H.245. Max 5 connections: RTP starts at
UDP
5013 65534 <adr>, RTCP at <adr>+1 (=RTP+1).
Adm: even port number only
Def: Attention: The phone is prepared to
handle up to 5 port couples in total. If the
base port is set to 5004 inside the phone,
5008 - 0 - the port range then is 5004 ... 5013. But,
UDP
5013 65534 in H4k scenarios, only the upper three
couples (starting from the top) are used:
5012/5013, 5010/5011 and 5008/5009 .
Adm: even port number only
Def: Attention: The phone is prepared to
handle up to 5 port couples in total. If the
base port is set to 5004 inside the phone,
5008 - 0 - the port range then is 5004 ... 5013. But,
UDP
5013 65534 in H4k scenarios, only the upper three
couples (starting from the top) are used:
5012/5013, 5010/5011 and 5008/5009 .
Adm: even port number only
TCP 4060 Def: CorNet-TC
0 - Def: DLS: Communication interface
18443
65535 workpoints – DLS
TCP 21 Def: FTP-Server Control Port
0 -
TCP 443 Def: HTTPS
65535
0 -
TCP 8085 Def: HTTP optiPoints, HG1500
65535
UDP 5100
HiPath HG 1500 V7
Remarks
Page - 13 -