Soap Dispenser Care And Maintenance - Bradley 6322 Manual De Instalación

6322, 6324, 6326
Dispenser Care and Maintenance
Regular cleaning is advised for a soap dispenser in order that it may provide optimum performance and
maximum service life. Cleaning the soap dispenser monthly to remove soap residue, dirt , and other
accumulations should become a regular part of your washroom cleaning routine and general
maintenance program.
General Cleaning of Soap Dispenser
1. Use warm water and soap to clean the exterior of the soap dispenser. Do not use abrasive cleaners
on the metal parts of the soap dispenser. Dry and polish with a soft cloth for a bright finish.
2. Inspect the interior of the soap container for residue or coagulation of soap. If residue or
coagulation exists, clean the soap container. To clean the soap container, pour out any remaining
soap in the container. Fill the container half full of hot water and shake container to dislodge the
soap residue. Then empty the water from the container. Repeat steps until the soap container is
clean.
3. To clean the internal components of the soap dispenser, it is only necessary to pump hot water
through the soap dispenser until a clean flow of water comes out of the spout.
Changing Soap Types
1. Unscrew the soap container from the adapter/shank and pour out all the remaining soap from the
dispenser. Using hot water, rinse the soap container two or more times until all the residue in the
container is eliminated. In addition, pump the valve several times with hot water until a clear flow
of water appears. Follow these steps with a rinse of ethyl alcohol (ethanol) and shake out
thoroughly. Let the soap dispenser air dry.
2 8/31/06
Maintenance
Bradley Corporation