Idiomas disponibles
Idiomas disponibles
Illustration 7
End panel/back
assembly
Illustration 8
Illustration 9
Mounting tape
Bottom of
end panel
LATERAL FILE BOOKCASE
Cam bolt
Top
End panel/back
assembly
Cam connector
Arrow
Top
Mounting tape
Bottom of
end panel
7. Refer to Illustration 7. Attach end panel/back
assembly to top. Insert top cam bolts into holes
along top edge of end panel/back assembly.
8. Refer to Illustration 8. With arrows facing top, install
cam connectors (from hardware pack) into holes
along top edge of end panel/back assembly. Use
the Phillips screwdriver to tighten cam connectors.
Turn cam connectors clockwise to tighten.
IMPORTANT
Mounting tape used to secure bookcase is extremely
sensitive and designed for permanent installation.
Attempting to remove mounting tape after installation
will damage mounting tape.
9. Refer to Illustration 9. Ensure bottoms of end pan-
els are clean, dry, and free of oils. Use a rag and
warm soapy water to clean bottom of end panels.
Unroll mounting tape and carefully apply a piece of
mounting tape to the bottom of each end panel.
242-7670B
SIDE 3 OF 4 (9/04)
