1. Manuales
  2. Marcas
  3. HON Manuales
  4. Muebles de Interior
  5. HON115900AFNN
  6. Manual del usuario

HON HON115900AFNN Manual Del Usuario

Ocultar thumbs
1
2
3
4
5
6
Idiomas disponibles

Idiomas disponibles

Enlaces rápidos

Illustration 1
Illustration 2
Pull (design
may vary)
DRAWER/DOOR PULL ASSEMBLY
Screw
Outside surface
of drawer
Pull (design
may vary)
Screw
Outside surface
of door
Read all instructions and review illustrations
before installing.
Tools required for assembly:
Phillips screwdriver
This assembly includes:
(2 or 3) Drawer/door pull (design may vary)
(4 or 6) Screw
NOTE
For shipping purposes, certain models will have
the drawer/door pulls pre-installed on the inside of
the drawers/doors. Use the phillips screwdriver to
remove and reinstall pulls as described below.
If included, discard plastic shipping spacers. Do
not reuse spacers for installation of pulls.
Drawer Pull Installation (refer to Illustration 1):
1. Open drawer and position pull onto outside sur-
face of drawer as shown.
2. From inside of drawer, use Phillips screwdriver to
install two screws through holes in drawer and into
pull. Fully tighten screws.
3. Repeat for all drawers.
Door Pull Installation (refer to Illustration 2):
1. Open door and position pull onto outside surface
of door as shown.
2. From inside of door, use Phillips screwdriver to
install two screws through holes in door and into
pull. Fully tighten screws.
3. Repeat for all doors.
242-7438A
(7/05)
loading

Manuales relacionados para HON HON115900AFNN

Resumen de contenidos para HON HON115900AFNN

  • Página 1 DRAWER/DOOR PULL ASSEMBLY Illustration 1 Read all instructions and review illustrations before installing. Screw Tools required for assembly: Phillips screwdriver Outside surface This assembly includes: of drawer (2 or 3) Drawer/door pull (design may vary) (4 or 6) Screw NOTE For shipping purposes, certain models will have the drawer/door pulls pre-installed on the inside of the drawers/doors.
  • Página 2 HANGRAILS Illustration 1 Read all instructions and review illustrations before installing. Crossrail (optional) Tools required for assembly: None Hangrail This assembly includes: Crossrail clip Hangrail (2 per drawer) (optional) Crossrail Clip (optional - 4 per drawer) Crossrail (optional - 2 per drawer) NOTE The illustration shows the drawer removed, but installation of hangrails can be done with the...
  • Página 3 POIGNÉE DE TIROIR/PORTE Illustration 1 Lire toutes les instructions et étudier les illustra- tions avant l'installation. Outils requis pour l'assemblage : Tournevis cruciforme Surface Cet ensemble comprend : extérieure (2 ou 3) Poignée de tiroir/porte (la conception du tiroir peut varier) (4 ou 6) Vis REMARQUE Pour l'expédition, les poignées de tiroir/porte de...

  • Página 4: Barres Coulissantes

    BARRES COULISSANTES Illustration 1 Lire toutes les instructions et examiner les illustrations avant d’installer. Barre transversale Outils nécessaires pour le montage : Barre (option) Aucun coulissante Ce montage comprend (Illustration 1) : Pince de barre Barre coulissante (2 par tiroir) transversale Pince de barre transversale (option - 4 par tiroir) (option)

  • Página 5: Conjunto De Tirador De Gaveta/Puerta

    CONJUNTO DE TIRADOR DE GAVETA/PUERTA Ilustración 1 Lea todas las instrucciones y examine las ilustra- ciones antes de instalar. Tornillo Herramientas requeridas para el armado: Destornillador Phillips Superficie Este conjunto incluye: exterior de (2 ó 3) Tiradores de gaveta/puerta (el diseño la gaveta puede variar) (4 ó...

  • Página 6: Rieles Para Carpetas

    RIELES PARA CARPETAS Figura 1 Lea todas las instrucciones y revise todas las figuras antes de instalar. Riel transversal Herramientas necesarias para el montaje: Riel para (opcional) Ninguna carpetas Este montaje incluye: Pinza para riel Riel para carpeta (2 por cajón) transversal Pinza para riel transversal (opcional - 4 por cajón) (opcional)