Protecting The Environment; Ec Declaration Of Conformity; Technical Data - Black and Decker BCHTS36 Traducción De Las Instrucciones Originales

ENGLISH
Continuous satisfactory operation depends upon proper tool
care and regular cleaning.
Lubrication oil is available from your BLACK+DECKER dealer
(cat. no. A6102-XJ).
Warning! Before performing any maintenance on corded/
cordless power tools:
Switch off and unplug the appliance/tool.
u
Or switch off and remove the battery from the appliance/
u
tool if the appliance/tool has a separate battery pack.
Or run the battery down completely if it is integral and then
u
switch off.
Unplug the charger before cleaning it. Your charger does
u
not require any maintenance apart from regular cleaning.
Regularly clean the ventilation slots in your appliance/tool/
u
charger using a soft brush or dry cloth.
Regularly clean the motor housing using a damp cloth. Do
u
not use any abrasive or solvent-based cleaner.
After use, carefully clean the blades. After cleaning, apply
u
a film of light machine oil to prevent the blades from
rusting.
Mains plug replacement (U.K. & Ireland only)
If a new mains plug needs to be fitted:
Safely dispose of the old plug.
u
Connect the brown lead to the live terminal in the new
u
plug.
Connect the blue lead to the neutral terminal.
u
Warning! No connection is to be made to the earth terminal.
Follow the fitting instructions supplied with good quality plugs.
Recommended fuse: 5 A.

Protecting the environment

Z
Separate collection. Products and batteries
marked with this symbol must not be disposed of
with normal household waste.
Products and batteries contain materials that can be
recovered or recycled, reducing demand for raw materials.
Please recycle electrical products and batteries according to
local provisions. Further information is available at
www.2helpU.com

Technical data

BCHTS36 B H1
Voltage V
DC
Blade strokes
min
-1
(no load)
Blade length cm
Blade gap mm
Weight kg
10
(Original instructions)
BCHTS36 25L1 H1
36 36
1300 1300
55 55
22 22
3.2 3.2
Batteries
Cat#
Cat# Vdc Ah Weight Kg
Amps
BL1518 18 1.5 0.38 BL1518
BL1518ST 18 1.5 0.38 BL1518ST
BL2018 18 2.0 0.39 BL2018
BL2018ST 18 2.0 0.39 BL2018ST
BL2518 BL2518
18 2.5 0.43
BL4018 18 4.0 0.64 BL4018
BL5018 18 5.0 0.7 BL5018
BL20362 18 2.0 0.64 BL20362
BL2536 18 2.5 0.68 BL2536
BL1554 BL1554
18/54 1.5 1.08
BL2554 18/54 2.5 1.2 BL2554
Level of sound pressure according to EN 60745:
Sound pressure (L ) 77 dB(A), uncertainty (K) 4 dB(A)
pA
Sound power (L ) 88 dB(A), uncertainty (K) 3 dB(A)
WA
Vibration total values (triax vector sum) according to EN 60745:
Vibration emission value (a ) < 2.5 m/s
h

EC declaration of conformity

MACHINERY DIRECTIVE
OUTDOOR NOISE DIRECTIVE
BCHTS36 – Hedge Trimmer
Black & Decker declares that these products described under
"technical data" are in compliance with:
2006/42/EC, EN 60745-1:2009 +A11:2010,
EN 60745-2-15:2009 +A1:2010
2000/14/EC, Hedge trimmer 1300 min
Measured sound pressure (L
Uncertainty (K) 3 dB(A)
Guaranteed sound power (L
These products also comply with Directive 2014/30/EU and
2011/65/EU. For more information, please contact Black &
Decker at the following address or refer to the back of the
manual.
The undersigned is responsible for compilation of the technical
file and makes this declaration on behalf of Black & Decker.
Black & Decker Europe, 270 Bath Road, Slough,
Chargers (minutes)
90590287* N517388* BDC1A BDC2A
400mA 1A 1A 2A
225 90 90 45
225 90 90 45
300 120 120 60
300 120 120 60
380 150 150 75
600 240 240 120
750 300 300 135
X X X X
X X X X
225 90 90 45
380 150 150 75
2 2
, uncertainty (K) 1.5 m/s
, Annex V
-1
) 77 dB(A)
pA
) 98 dB(A)
WA
Becky Cotsworth
Director – Outdoor Products Group
Berkshire, SL1 4DX
United Kingdom
21/08/2019
BDC2A36
1.35A
X
X
X
X
X
X
X
90
110
X
X