Warning:
EN
Any pain and any persistent symptoms must be considered as indications of a possible serious
problem. If any symptoms appear, please consult a doctor before continuing to use "TONIC MASS".
INSTRUCTIONS FOR USE
1) Characteristics
• Massage by vibrations.
• 9 motors.
• 5 levels of intensity.
• 4 massage areas (neck/shoulders/back/buttocks & thighs).
• Timer: 4 operating times (10, 15, 20 or 25 minutes).
• 8 pre-programmed modes combining the different massage areas.
2) Description of TONIC MASS
Belts:
Using the attachment belts located on the back of the cushion, attach it to a chair to enjoy a massage while reading,
while resting or even while working.
Manual control:
3) Using TONIC MASS
Connect the adapter to a plug socket and connect the other end to the female input connector located on the side of the
cushion.
Turn the appliance on or off by pressing the ON/OFF button (1).
Choice of two modes (Manual or Automatic):
Manual Mode:
• Tonic Mass enables you to select 5 different levels of intensity. To do this, press the corresponding button (2). Each press
corresponds to one level of intensity.
• You may also select an operating time by pressing button (3). This enables you to choose from between 4 different
operating times (10, 15, 20 or 25 minutes).
• Finally, you can select the desired massage area by pressing button (5). This gives you the possibility of focusing the
massage on an area where you would like to relax.
4
Simply press the manual control button on the "TONIC MASS" to programme the massage of your
choice and to target specific areas: neck/shoulders/back/buttocks & thighs. The motors can also
be programmed to massage according to different cycle speeds, different times and different
areas, which adds an additional dimension to its programming capacities.
A pocket has been specially designed on the side of the cushion to store the remote control.
1. ON/OFF
2. TO SELECT THE LEVEL OF INTENSITY
3. TO SELECT THE OPERATING TIME
4. TO SELECT THE MASSAGE PROGRAMME
5. TO SELECT THE MASSAGE AREA