Refrigerator Care; Cleaning - Haier HRB15N3 Serie Manual Del Usuario

Ocultar thumbs Ver también para HRB15N3 Serie:
Tabla de contenido
Idiomas disponibles

Idiomas disponibles

REMOVABLE FREEZER STORAGE DRAWERS
IMPORTANT: Do not overload the drawers.
To Remove and Replace a Freezer Drawer:
1. Remove the freezer draw by extending the drawer fully, and then
lift up on the drawer and pull out to remove.

REFRIGERATOR CARE

CLEANING

Both the refrigerator and freezer sections defrost automatically.
However, clean both sections about once a month to avoid buildup
of odors. Wipe up spills immediately.
Because air circulates between both sections, any odors formed in
one section will transfer to the other. You must thoroughly clean
both sections to eliminate odors. To avoid odor transfer and drying
out of food, wrap or cover foods tightly.
WARNING
Explosion Hazard
Use non ammable cleaner.
Failure to do so can result in death, explosion or re.
IMPORTANT:
Do not use harsh chemicals, ammonia, chlorine bleach,
concentrated detergent, solvents, abrasives or metal scouring
pads to clean your refrigerator inside or out. They can damage
and/or discolor the refrigerator finish.
Do not use warm water to clean glass shelves while they are still
cold. Glass may break when exposed to sudden temperature
changes or impact.
2. Replace the drawer by tilting the back of the drawer downward
onto the support and sliding it in.
WARNING
Electrical Shock Hazard
Unplug your appliance or disconnect power before
cleaning.
Failure to do so can result in death, electric shock or
personal injury.
1. Unplug refrigerator or disconnect power.
2. Clean the interior. Hand wash, rinse, and dry removable parts
and interior surfaces thoroughly. Use a clean sponge or soft
cloth and a mild detergent in warm water.
3. Clean the exterior surfaces.
Painted metal: Wash painted metal exteriors with a clean, soft
cloth or sponge and a mild detergent in warm water. Rinse
surfaces with clean, warm water and dry immediately to avoid
water spots.
Stainless steel: Stainless steel is corrosion resistant and not
corrosion-proof. To help avoid corrosion of your stainless steel,
wash stainless steel surfaces with a clean, soft cloth or sponge
and a mild detergent in warm water. Rinse surfaces with clean,
warm water and dry immediately to avoid water spots.
NOTE: When cleaning stainless steel, always wipe in the
direction of the grain to avoid cross-grain scratching.
4. Plug in refrigerator or reconnect power.
13
Tabla de contenido

Solución de problemas

loading

Este manual también es adecuado para:

Hrb15n3bgs

Tabla de contenido