camry Premium CR 4069 Manual De Uso página 4

Ocultar thumbs Ver también para Premium CR 4069:
Tabla de contenido
Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 9
19. Do not use the appliance if it has been dropped or damaged in any other way.
20. During the operation of the appliance, do not cover the ventilation openings in the
cabinet.
21. Do not use abrasive detergents to clean the case, as they can remove important
informational graphic symbols such as: marks, warning signs, etc.
22. Never use the appliance for hot oil or fat (hot products).
23. Do not touch the appliance with wet hands.
24. Do not use the equipment to crush ice, bones and other hard products or to grind nuts
and coffee.
25. Do not put hands or cutlery into the bowl while the mixer is operating.
26. Observe the continuous operation time of the equipment for 50 seconds. After this time
has elapsed and before restarting the equipment, wait 4 minutes. Both the excess of the
time of use of the device and the lack of sufficient rest of the same, can cause
irreparable damage to the engine. If the appliance is blocked, before cleaning,
disconnect it from the power supply.
27. Before the first use, wash and dry the appliance thoroughly (see: cleaning and
maintenance).
DESCRIPTION OF THE DEVICE (Figures 1 and 4)
1a Cup lid
1c Cup
1e Engine unit
USING THE DEVICE
1. Ensure that all blender elements are clean.
2. Place the ingredients in the cup (1c). Do not exceed 600ml (Fig 2).
3. Attach the blender cutting blades (1d) to the blade cup (1c) by screwing them onto the cup (Figure 3).
4. Place the cup (1c) with the attached cutting blades (1d) on the engine unit (1e). Please note the position of the switch indicator (4f).
5. Connect the power cord to a power socket.
6. To start the blender, turn the cup (1c) to the right and turn on the button. Do not use the blender for longer than 2 minutes. T
7. Remove the power cord from the power socket.
6. Remove the cup (1c) from the engine unit (1e).
CLEANING AND MAINTENANCE
Clean the blender cup and cutting blades using water with dishwashing liquid after every use.
The engine unit must not be cleaned under running water or immersed in water.
TECHNICAL DATA
Power: 500W
Power supply: 220-240V~ 50Hz
To protect your environment: please separate carton boxes and plastic bags and dispose them in corresponding waste
bins. Used appliance should be delivered to the dedicated collecting points due to hazarsous components, which may
effect the environment. Do not dispose this appliance in the common waste bin.
LESEN SIE AUFMERKSAM WICHTIGE ANWEISUNGEN BEZÜGLICH DER SICHERHEIT
DER BENUTZUNG BEWAHREN SIE DIESE FÜR DIE ZUKUNFT AUF
Bei Verwendung des Gerätes zu gewerblichen Zwecken werden die Garantiebedingungen
geändert.
1. Vor dem ersten Gebrauch, die Bedienungsanleitung lesen und die dort angegebenen
Hinweise beachten. Der Produzent trägt keine Verantwortung für Schäden, die aufgrund
von bestimmungswidriger Nutzung oder unsachgemäßer Bedienung entstanden sind.
2. Das Gerät ausschließlich an die Steckdose 220-240V~ 50Hz anschließen. Es darf nicht
zu anderen, bestimmungswidrigen Zwecken benutzt werden.
3. Wegen Vorsichtsmaßnahmen, sollten keine weiteren Geräte an den gleichen Stromkreis
angeschlossen werden.
1b Cup bottom
1d Blender cutting blades
4f Switch indicator
DEUTSCH
ALLGEMEINE SICHERHEITSVORSCHRIFTEN
4
Tabla de contenido
loading

Este manual también es adecuado para:

Cr 4069

Tabla de contenido