Cleaning And Sanitizing; Cautions With Stainless Steels - Skymsen AMP-400 Manual De Instrucciones

3.3 Cleaning and Sanitizing

The equipment shall be totally cleaned and sanitized:
- Before being used the first time;
- After every day's operation;
- When it has not been used during a long time;
- Before operating it after a long period unused.
Some parts of the equipment may be removed for cleaning , such as:
-Shaper/Modeling Base #06 (Pic.01);
-Front Protection #07 Pic. 01).
Wash all the parts with water and neutral soap.
To clean the equipment, follow the procedures below:
Place the General Switch to position "0"
Unplug the machine from the socket.
Remove the Front Protection #07 (Pic.01).
Remove the Shaper/Modeling Base #06 (Pic. 01).
Pull the Handle #01 (Pic. 01) forward the equipment and place the Handle Lock #04 (Pic.
01).
Do all the cleaning process.
Replace the items listed above after finishing the cleaning process
Cautions with Stainless Steel
The Stainless Steel may present rust signs, which are ALWAYS CAUSED BY EXTERNAL
AGENTS, especially when the cleaning or sanitization is not constant and appropriate
.
Always unplug the machine before cleaning process.
Never spray water directly to the equipment
IMPORTANT
IMPORTANT
27