Fig. I
The figure shows the package area at the right of the centre console in front of the heater box.
Release existing hexagon screw (40) and pull cross brace (41) a little to the right.
Carefully fit mounting bracket for interface box (13) with mounted and connected interface box (7) in position and
firmly tighten with existing hexagon screw (40).
Take particular care when fitting mounting bracket for interface box (13) with mounted and connected interface
box (7) to ensure that no cables or wires are bent or damaged.
Now tie back connection cable and adapter lead with cable straps (26) and fit connection cable for charger cradle
with hands-free facility A in front passenger's footwell.
Fig. J
Remove adhesive strips (42) and adhere on lower edge of wiring harness (43).
Fit anti-rattle pad (25) about wiring harness (43) including plug housing and fix with adhesive strips (44)
on anti-rattle pad (25).
Remove adhesive strips (45) and adhere on anti-rattle pad (25).
Continue with Section 2.4
2-33
Capítulos
