Weighing Items; Controls And Indicators - Datalogic Magellan 8500 Guía De Referencia Rápida

Weighing Items

The L-shaped All-Weighs
you to place items anywhere on its surface,
including leaning against its vertical sec-
tion, to be weighed accurately. The raised
Produce Rail
way to ensure that items do not rest on the
counter or other non-weighing surfaces.
Once weighed items are in place, enter
PLU (price Look-Up) data as described in
your POS system instructions. Item weight
is displayed on the Remote Display and/or
the host display.

Controls and Indicators

The control panel consists of two indicator LEDs
and two push buttons as described below.
Indicator LEDs
The green LED indicates scanner status, and the
yellow LED is primarily used to show scale status
as described in Table 1 below:
Table 1.Green and Yellow LED Functions
LED INDICATION
Scale at Zero
Scanner Active
Good Read Indica-
a
tion
Program Mode
Indication
2
™
platter allows
TM
also provides a convenient
DURATION
Yellow LED on steady
a
Green LED on steady and dim
a
Green LED - bright flash
Green LED - Continuous flashing
Volume/Tone Push Button
Scale Zero
Push Button
COMMENT
The scale is at rest and reads zero weight.
The scanner is ready for operation. Scan-
ning is immediately available.
Indicates a bar code has been read and
decoded.
Indicates the scanner is in Label Program-
ming Mode. Cycle power to exit Program-
ming Mode.
Magellan
Produce
TM
Rail
Green LED
Yellow LED
Ω
®
8500/8500