Bulteh 2000 EKOMILK Guia Del Usuario página 8

mode)
Ekomilk-M)
goat milk - see p. 3)
* These modes are available for Milk analyzers with suction pump installed
only.
Press the search buttons
MILK ANALYSIS WITH MOTOR (SUCTION PUMP)
Press the MODE button only once. Press the search buttons
MOTOR CHOICE mode.
Press OK when the MOTOR CHOICE mode is displayed.
Set the desired motor mode - ON with search buttons
confirm it. The message MOTOR TURNED ON appears on the display. This
way the "MOTOR ON" mode will remain set, even if the power supply is
turned off.
Take out the plunger from the syringe (Step1) (for Ekomilk Ultra Pro - both
plungers). Insert the plastic plug with the vinil tube instead of the plunger
(Step 2).
Plug
The Analyzer is ready for use in mode with suction pump.
Measurement
Steps: Fill the measuring mug with the milk sample to be measured. Place
the measuring mug on the plastic support (5) with the tube (sucker) into the
milk sample.
Press MODE and by means of the search buttons
mode:
goat etc. milk - see p. 3)
8
COW MILK - analysis of cow milk
CLEANING *- cleaning at the end of working day (Available in MOTOR ON
MOTOR CHOICE* - choice the basic mode (Ekomilk, Ekomilk-120 and
CALIBRATION - calibration
SYSTEM - manufacturer's mode only
SHEEP (BUFFALO, GOAT) MILK - analysis of sheep milk ( buffalo or
Plunger
COW MILK - analysis of cow milk
SHEEP (BUFFALO, GOAT) MILK - analysis of sheep milk (buffalo,
to select desired mode.
Step 1
to select
. Press OK to
Step 2
select the desired