Install The Handles; Complete The Installation - Kohler K-T945 Guia De Instalacion

Ocultar thumbs Ver también para K-T945:
Tabla de contenido
Idiomas disponibles

Idiomas disponibles

Spline Adapter
Valve Body

2. Install the Handles

Adjust each handle so the lever faces horizontal when closed.
To adjust the handles, remove the handle assembly. Remove and
turn the spline adapter 1/4 turn. Reinstall the spline adapter.
Reposition the handle. If the handle is not horizontal, repeat the
procedure until it is positioned properly.
Remove the handles.
Apply plumbers putty or other sealant to the back of each
escutcheon according to the putty manufacturer's instructions.
Carefully slide the escutcheon over the handle bonnet.
Securely hand tighten the handle assembly onto the valve body.
Press the escutcheon firmly against the wall.
Remove any excess putty or sealant.

3. Complete the Installation

Turn on the water supplies and check the installation for leaks.
Repair as needed.
1023410-2-B
Apply
plumbers
putty.
Escutcheon
Lever
4
Handle
Bonnet
Kohler Co.
Tabla de contenido
loading

Tabla de contenido