Product Description And Specifications; Intended Use - Berner BACAGXB 18V Manual Original

the point of operation, is moving away from
your body, the possible kickback may propel
the spinning wheel and the power tool directly
at you.
When wheel is binding or when interrupting a
u
cut for any reason, switch off the power tool
and hold the power tool motionless until the
wheel comes to a complete stop. Never at-
tempt to remove the cut-off wheel from the
cut while the wheel is in motion otherwise
kickback may occur. Investigate and take cor-
rective action to eliminate the cause of wheel
binding.
Do not restart the cutting operation in the
u
workpiece. Let the wheel reach full speed
and carefully re-enter the cut. The wheel may
bind, walk up or kickback if the power tool is re-
started in the workpiece.
Support panels or any oversized workpiece to
u
minimize the risk of wheel pinching and kick-
back. Large workpieces tend to sag under
their own weight. Supports must be placed un-
der the workpiece near the line of cut and near
the edge of the workpiece on both sides of the
wheel.
Use extra caution when making a "pocket
u
cut" into existing walls or other blind areas.
The protruding wheel may cut gas or water
pipes, electrical wiring or objects that can
cause kickback.
Safety Warnings specific for Sanding
operations
English
Do not use excessively oversized sanding
u
disc paper. Follow manufacturers recom-
mendations, when selecting sanding paper.
Larger sanding paper extending beyond the
sanding pad presents a laceration hazard and
may cause snagging, tearing of the disc, or
kickback.
Safety Warnings specific for Wire Brushing
operations
English
Be aware that wire bristles are thrown by the
u
brush even during ordinary operation. Do not
overstress the wires by applying excessive
load to the brush The wire bristles can easily
penetrate light clothing and/or skin.
If the use of a guard is recommended for wire
u
brushing, do not allow any interference of the
wire wheel or brush with the guard. Wire
wheel or brush may expand in diameter due to
work load and centrifugal forces.
Additional safety information
Wear safety goggles.
Use suitable detectors to determine if there
u
are hidden supply lines or contact the local
1 609 92A 5K8 • 29.6.20
u
u
u
u
u
u
u
Product Description and
Specifications
may result in electric shock, fire and/or serious in-
jury.
Please observe the illustrations at the beginning
of this operating manual.

Intended use

English
The power tool is intended for cutting, roughing
and brushing metal and stone materials, as well
as making holes in stone materials using diamond
core cutters, without the use of water.
utility company for assistance. Contact with
electric cables can cause fire and electric
shock. Damaging gas lines can lead to explo-
sion. Breaking water pipes causes property
damage.
Do not touch grinding and cutting discs until
they have cooled down. The discs can be-
come very hot while working.
Release the On/Off switch and set it to the
Off position when the power supply is inter-
rupted, e.g. when the battery pack is re-
moved. This prevents uncontrolled restarting.
Secure the workpiece. A workpiece clamped
with clamping devices or in a vice is held more
secure than by hand.
Do not open the battery. There is a risk of
short-circuiting.
Protect the battery against heat, e.g.
against continuous intense sunlight,
fire, dirt, water and moisture. There is
a risk of explosion and short-circuiting.
In case of damage and improper use of the
battery, vapours may be emitted. The battery
can set alight or explode. Ensure the area is
well ventilated and seek medical attention
should you experience any adverse effects. The
vapours may irritate the respiratory system.
Only use the battery with products from the
manufacturer. This is the only way in which you
can protect the battery against dangerous over-
load.
The battery can be damaged by pointed ob-
jects such as nails or screwdrivers or by
force applied externally. An internal short cir-
cuit may occur, causing the battery to burn,
smoke, explode or overheat.
English
Read all the safety
and general instruc-
tions. Failure to ob-
serve the safety and
general instructions
English
English | 19