Door Alignment - GE 22 Serie Manual Del Propietario E Instalación

7/16" Socket Wrench
To remove the base
grille, open the doors,
remove the screw at
each end of the base
grille and then pull
the grille straight out.
10

Door Alignment

If doors are uneven, adjust the refrigerator
door.
Using a 7/16" socket wrench, turn the
door adjusting screw to the right to raise
the door; to the left, to lower it. (A nylon
plug, imbedded in the threads of the pin,
prevents the pin from turning unless a
wrench is used.)
Raise
After one or two turns of the wrench,
open and close the refrigerator door
and check the alignment at the top of
the doors.