Electrical Connection; Check Rotation Direction; Operating Instructions - Sicam JUMBO TCS26 Manual Original

4.3

Electrical connection

1. Check the correspondence of the mains tension and
the tension shown on the identification tag.
2. Ask a qualified electrician to mount a connection
plug for single-phase or (depending on the tension
you have ordered ) three-phase current (see the
electrical connections diagram inside the electrical
panel).
i
The costs of arranging a mains protection device for
the plug are borne by the customer.
3. Protect the JUMBO TCS26 according to specific
national rules.
4.4

Check rotation direction

Warning - malfunctioning danger!
JUMBO TCS26 turns in counter-clockwise
direction.
¶
Turn off the main switch.Check the manual
section dedicated to functioning anomalies
to find the cause (see chap. 5.3)
For a correct functioning of JUMBO TCS26 it is extre-
mely important that after having connected and started
the machine the rotation direction corresponds to that
shown by the arrow on the control unit motor.
Fig. 2: Check rotation direction.
Sicam srl società unipersonale
Operating instructions | JUMBO TCS26 | 25
5.

Operating instructions

Warning - tire or rim damage danger!
Excessive pressure can e. g. result in cracks
(on the inside/outside) of the tire. The rim
can be scratched or deformed.
¶
Read the Wdk publications available in
German and English! (www.wdk.de: moun-
ting/demounting instructions – criteria
catalogue)
¶
Inner temperature of the tire must be at
least 15 °C (only in case of RFT/UHP).
¶
Read the Wdk publications available
in German and English! (www.wdk.de:
mounting/demounting instructions – tire
overheating)
¶
Adjust pressure to the type of tire.
¶
Use the plastic protections on the types of
rim that need it.
!
Before demounting or mounting operations it is ext-
remely important to collect all the rim and tire data.
In this way it will be possible to know in advance the
mounting, the pressure and the required accesso-
ries!
en
|
1 695 400 376 2013-04-17