Idiomas disponibles
Idiomas disponibles
Digital Power Zoom Flash DÖRR DCF 52 Wi
instruction Manual
reflecting Plate
diffuser Plate
Flash head
battery
compartment
lid
aF- red light
slave sensor
wireless
sensor
Metal base
① ② ③ ④
⑧
⑨
Nomenclature
1. high speed sync indicator
2. slave Mode indicator
3. slave Mode setting
4. ttl Flash Mode indicator
5. wireless ttl Flash Mode activated
6. Manual Mode indicator
7. Flash output Power ratio for Manual
Flash Mode / wireless channel
8. wireless Group and Group setting
9. zoom Position
10. standby Mode indicator
Preface
thank you for purchasing a dÖrr zoom flash. the flash unit is designed for the usage with digital
cameras with TTL flash control. Before using the DÖRR DCF 52 Wi for the first time, we recommend
to read this manual carefully so that you can benefit from all functions of your new flash. Please also
adhere to the indications for flash photography in the instruction manual for your camera.
Important Information
before using the dÖrr dcF 52 wi, please pay attention to the following safety instructions:
• In case of failure, do not attempt to disassemble the flash yourself as there is high voltage circuitry
inside. in case the flash proves to be defective, send it to your local dealer or service agent of your
country. in case the flash should break, make sure not to touch the inside elements.
• The flash is a technical precision device that can be damaged by impacts and other ungentle
handling.
• This flash is not weatherproofed. It should be protected from rain and excessive humidity to avoid
irreparable damage.
• Be sure to protect the flash from high temperatures. Never leave it in the car exposed to direct
sunlight. avoid extreme temperature fluctuations.
• Never clean the flash with gasoline or other strong detergents.
⑤ ⑥
⑦
11. aperture setting indicator
12. Flash readY indicator and test button
13. Main switch
14. ttl ok exposure control indicator
15. Mode button for Flash settings
16. control keys
17. zoom button for Manual zoom control
18. socket for dÖrr Power Pack
19. X-sync socket for sync cable
20. socket for Firmware update
21. +/- Flash exposure compensation
⑮
Mode
readY
test
oFF
⑩
⑪
⑫
Models canon / nikon / sony-alpha /
olympus-Panasonic
⌃ ⌄
Mounting Foot for
Models canon / nikon /
olympus- Panasonic
Mounting Foot with lock
for Model sony- alpha
⑱
⑲
⑳
⑯
⑰
zooM
ttl ok
on
⑬
⑭
9
