Idiomas disponibles
Idiomas disponibles
Usage with DÖRR Power Pack
using the flash with an external dÖrr Power Pack, you can increase the number of flashes you can
fire and take fast continuous shots with flash. In order to avoid an overheating of the DCF 52Wi we
recommend not to take more than 20 continuous shots. otherwise the overheat protection of the flash
will become active. the "ovh" sign will show up on the lcd for about 3 minutes and the flash stops
operation. we recommend a cool down time of 10 minutes for the flash.
LC Display
the lcd provides the following readings:
• Auto or manual zoom reflector positioning (24/28/35/50/70/ 85 or 105mm)
• Selected lens aperture
• Display of TTL
• Slave mode S0 to S3
• Wireless TTL mode WiTTL with cannels 1 to 4 and groups A, B, C
• Displays manually selected power ratio M (full, 1/2, 1/4, 1/8, 1/16, 1/32 and 1/64)
• Flash Exposure Compensation -3.0 to +3.0 EV
• High Speed Sync ON/OFF
• Standby Indication
• Overheat Indication
Specifications
overview Guide no./Focal length
Power/zoom
105 mm
85 mm
70 mm
50 mm
35 mm
28 mm
24 mm
Flash control:
Guide no. at iso 100:
wireless Flash release:
slave Modus:
Flash exposure compensation: -3.0 to +3.0 ev in steps of 1/3
high speed synchronization:
display:
zoom Flash head:
bounce angle:
swivel angle:
Flash ready indicator:
Flash ok indicator:
aF red light beam:
Power ratios:
Flash duration:
Flash recycling time:
colour temperature:
test button:
diffuser Plate:
reflecting Plate:
Power source:
sockets:
weight:
Measurements:
WEEE information
the waste electrical and electronic equipment directive (weee directive) is the european
community directive on waste electrical and electronic equipment, which became european law
in February 2003. the main purpose of this directive is to prevent electronic waste. recycling and
other forms of waste recovery should be encouraged to reduce waste. the below symbol (trash
can) on the product and on the packing means that used electrical and electronic products should
not be disposed of with general household waste. it is your responsibility to dispose of all your
electronic or electrical waste at designated collection points. disposing of this product correctly
will help to save valuable resources and it is a significant contribution to protect our environment
as well as human health. For more information about the correct disposal of electrical and
electronic equipment, recycling and collection points please contact your local authorities, waste
management companies, your retailer or the manufacturer of this device.
RoHS conformity
this product is compliant with the european directive 2002/95/ec of January 27, 2003 for the
restriction of use of certain hazardous substances in electrical and electronic equipment (rohs)
and its amendments.
CE marking
the ce marking complies with the european directives.
Specifications are subject to change.
14
Full 1/1
1/2
50
36
46
33
44
31
42
30
38
27
34
24
29
21
auto ttl or manual
50 with 100mm focal length
wi ttl flash control via master flash, 4 channels, 3 groups
4 settings with and without pre-flash recognition
up to 1/8000s
2" (5cm) lc display
auto zoom setting in steps of 24, 28, 35, 50, 70, 85 and 105 or
motor zoom available
0-90° in steps: 0°, 45°, 60° 75° and 90°
300°(180° to the left and 120° to the right)
red led on the rear side of flash
green led on the rear side of flash
range app. 1-8m
7 steps from full to 1/64
app. 1/1.000s – 1/20.000s
app. 0,5-8s with fresh batteries
app. 5.400 k
on the rear side of flash
integrated
integrated
4x1,5v aa alkaline batteries or rechargeable batteries of the same size
Sync socket, terminal for optional DÖRR power pack, firmware update socket
(update provided by dÖrr service agent)
270g (w/o batteries)
125x100x65mm
1/4
1/8
26
18
23
17
22
16
21
15
19
14
17
12
15
11
1/16
13
12
11
11
10
9
8
