ANSMANN POWERLINE 4 SMART Manual De Instrucciones página 13

To release/change the mains plug, press the locking tab
carefully (e.g. with a ballpoint pen) downwards a little and
slide the plug back.
Plug the charger into a suitable mains outlet. The
charger's readiness for operation is indicated by all 4
LEDs flashing orange three times. You can insert up to 4
NiMH or NiCd rechargeable batteries in AA or AAA sizes (or
even a mixture of the two). Ensure that the rechargeable
batteries are inserted with the correct polarity, matching
with the symbols in the charge slots. The charge process
starts automatically. The charge status of each recharge-
able battery is indicated by means of the indicator lights
(see CHARGE STATUS INDICATION) above the charge slot.
The rechargeable batteries do not need to be inserted at
the same time as the charge process for each rechar-
geable battery is controlled independently. Warming of
the rechargeable batteries during the charge process
is normal. After successfully charging a rechargeable
battery, the charge process switches automatically to
pulse maintenance charging. This function guarantees
optimum performance and prevents the self-discharge of
the rechargeable battery.
CHARGE STATUS INDICATION
ƒ
LED flashes red and green alternately: Repair mode