Panasonic TY-SP65P7W-K Instrucciones De Instalación página 4

Installation
Mount A
bracket
Rear of Plasma Display
Preparing the ends of the
speaker cables
1. Press down on the lever.
4
Mount B
bracket
Remove while
twisting
1. Push down the lever.
3. Return the lever to its
normal position.
2. Insert the cable.
3. Release the lever.
4. Catch the B bracket claws
in the A brackets (plasma
display side).
Fasten the A and B
brackets with bracket
mounting screws.
Note
Bracket
Adjust display and speaker height when
mounting
screws fastening the A and B brackets.
Caution
The left and right brackets are different, so
please check carefully when mounting.
5. Connect the speaker
cables.
• After preparing the ends of the speaker cables
• Connect the speaker cables for the left
• The red cable is for the (+) polarity and the
2. Insert
the cable.
for the right speaker, connect them as shown
in the illustration.
speaker in the same way.
black cable is for the (-) polarity. Do not
connect the cables to the wrong polarities.