After Use; Cleaning; Extend Cleanliness; Technical Data - Laerdal ALS Simulator Manual Del Usuario

After Use:

Cleaning

1 . Clean with mild soap and water; do not submerse the simulator or parts in
cleaning fluids or water .
2 . Use only on clean surface . Avoid felt tipped markers, ink pens, acetone, iodine
or other staining products and avoid placing the simulator on newsprint or
inked lines of any kind .
3 . To ensure longevity, each simulator should be cleaned after each training
session and a general inspection should be conducted regularly .
4 . Modules and all other parts should be drained and air-dried thoroughly
before storage and disinfected when needed . After use of injection pads
(use water only), accumulated water should be squeezed out . NOTE: Do
not store wet foam pads in the skin . To prevent mildew or mold, pads can
be soaked in a mild solution of disinfectant and water or bleach and water .
Squeeze excess solution from pads, allow them to dry, then store or reinsert
in simulator .
5 . Articulating parts will benefit from a light application of talcum powder prior
to training sessions .

Extend Cleanliness

To extend the cleanliness of your simulator:
1 . Use a small towel and lightly dust the simulator head and chest with a small
amount of powder (provided) . Wipe away any excess .
2 . Use gloves when handling the simulator .
Laerdal Recommends
Use only on clean surface . Avoid felt tipped markers, ink pens, acetone,
iodine or other staining products and avoid placing the simulator on
newsprint or inked lines of any kind . These will stain the simulator .
Photo 27
9

Technical Data

General

Operating Temperature:
0°C – 40°C at 90% relative humidity, non-condensing
Storage Temperature:
-15°C – 50°C at 90% relative humidity, non-condensing

ALS Simulator

Defibrillation: Average of 720 J /minute max
Emergency Cardiac Capabilities
• Synchronized variable heart rate, rhythm, abnormalities and duration
• Defibrillation (25 -360 J)
IV Arm
Accessible veins include median, basilic and cephalic
Standards/Approvals
The product is in compliance with the essential requirements
of Council Directive 2004/108/EC on electromagnetic
compatibility (EMC) .
The product is in compliance with Council Directive
2011/65/EU on restriction of the use of certain hazardous
substances (RoHS) .
Minimum Computer Requirements
• Intel i-core generation 3 or newer
• Score over 3000 PassMark - CPU Mark
• 4 GB RAM
• 120GB hard disk space
• 1366x768 or better
• Headset w/microphone
• USB ports – 2
Minimum Software Requirements
• Windows 7 or Windows 8
• 100% DPI

Replacement Parts:

For latest version of Spare Parts and Accessories, visit www . l aerdal . c om