JVC TK-C1460 Instrucciones página 27

Item
SHUTTER
This sets the electronic shutter as well as the ExDR (Extended
(ExDR)
Dynamic Range).
The use of an electronic shutter function enables shooting
with proper brightness, as more brightness results in higher
shutter speed.
The ExDR function allows even the shooting of a subject
having different luminous flux density by composing a picture
shot at 1/100 (1/120) sec. shutter speed with a picture shot
by a high-speed shutter. ( ): TK-C1460U
NORMAL: This fixes the shutter speed to 1/50 (1/60).
MANUAL: This sets the shutter speed by the item
AUTO:
M.ExDR: This is used when shooting a subject with
A.ExDR:
• Do not set to A.ExDR when using a manual lens.
• When M.ExDR mode or A.ExDr mode is used, the border
• When the SHUTTER (ExDR) item is set to M.ExDR or
* When the SHUTTER (ExDR) item is set to NORMAL, the following items
(SHUTTER SPEED, FAST LIMIT, ExDR LEVEL, and M.ExDR SPEED)
cannot be changed.
SHUTTER
This sets a shutter speed when MANUAL is set.
SPEED
The AUTO, M. ExDR, A. ExDR set value is displayed as
"- - -" and cannot be changed
[Set values: 1/120 (1/100), 1/250, 1/500, 1/1000, 1/2000,
1/4000, and 1/10000]
Functions and set values
The ExDR does not function.
SHUTTER SPEED on the SHUTTER screen.
The ExDR does not function.
When SENSE UP is functioning, MANUAL
cannot be selected. (Not displayed on MENU)
This automatically switches the shutter speed
according to brightness.
The ExDR does not function.
The item FAST LIMIT on the SHUTTER (ExDR)
screen sets a maximum shutter speed value.
difference in a luminous flux density in the screen
under a fixed illumination condition, and so on.
During ExDR mode, the item M.ExDR.SPEED on
the SHUTTER (ExDR) screen sets the composing
high shutter speed. It is possible to set only when
the items BLC and SENSE UP are OFF. What's
more, the ExDR LEVEL sets the signal level of
the composing high-speed shutter.
This is used when the subjects having different
luminous flux densities are continuously used
night and day in the situation where both indoor
and outdoor subjects are mixed in existence, and
so forth. During ExDR mode, the composing
shutter speed automatically varies according to
the contrast of a subject. This is set when shooting
the subject with changing brightness.
This can be set only when the item BLC is OFF.
What's more, the ExDR LEVEL sets the signal
level of the composing high-speed shutter.
MEMO
between a bright part and a dark part can be coloured
(cyan, orange, etc.), but this is not a malfunction.
A.ExDR, a flicker can occur under a fluorescent lamp,
mercury lamp, etc. However, this occurs by principle of
the ExDR function, and therefore this is not a
malfunction.
( ):TK-C1460U
Initial value
NORMAL
1/120
(1/100)
E-27