Medtronic GUARDIAN LINK Manual De Instrucciones página 9

Tabla de contenido
Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 107
Precautions
•  Do not attempt to use the Guardian™ Link (3) transmitter (MMT-7911) with a
MiniMed™ insulin pump without smart device connectivity. Only a MiniMed™
insulin pump with smart device connectivity can communicate with the
Guardian™ Link (3) transmitter (MMT-7911).
•  Only use the Guardian™ Sensor (3) glucose sensor (MMT-7020) with the
transmitter. Do not use any other sensor. Other sensors are not intended for use
with the transmitter and will damage the transmitter and the sensor.
•  Only use the green colored tester (MMT-7736L) with the transmitter. Pockets on
the transmitter are visible when connected to the tester. Do not use any other
test plug. Other test plugs are not intended for use with the transmitter and will
damage the transmitter and the tester.
•  Always use the tester when cleaning the transmitter. Do not use any other test
plug with the transmitter. Use of another test plug can allow water to get into the
transmitter or can prevent proper cleaning. Water can damage the transmitter.
•  Do not twist the tester or sensor while attached to the transmitter. Twisting the
tester or sensor will damage the transmitter.
•  Do not allow the tester to come in contact with any liquid when not connected to
the transmitter. A wet tester can damage the transmitter.
•  Do not allow the transmitter to come in contact with any liquid when not
connected to a sensor or to the tester. Moisture will damage the transmitter and a
wet transmitter can damage the sensor.
-3-
Tabla de contenido
loading

Este manual también es adecuado para:

Guardian link 3

Tabla de contenido