Intended Use - HURAKAN HKN Serie Manual De Instrucciones

EN
Warranties do not cover either consumable parts or installation, adjustment, and
maintenance operations specified in the present Operation manual.
Manufacturer shall keep the right to incorporate required changes in the structure or
manufacturing process, which do not entail any obligations for modification or improvement of
the previously manufacturer products.
The warranties do not limit any consumer rights established by the law.
Please apply to the authorized companies (Supplier or Seller) or their service centers
regarding all issues connected with maintenance and purchasing of spare parts.
3.

INTENDED USE

3.1 GENERAL INSTRUCTIONS
Operation manual includes information required for proper operation and maintenance
of the table during its intended use.
The table service life and its safety operation depend on observation of the operation
regulations.
3.2 SAFETY REQUIREMENTS
llThe product is not intended for use by persons (including children) with physical,
psychological and mental disabilities or by persons having neither experience nor knowledge,
unless they supervised or instructed by the person in charge for their safety. Children shall be
supervised to avoid playing with the product.
Level of equipment protection provided by enclosures amounts to IP20, and to IP24
for table types HKN PPRC2-G..., HKN PPRC3-G..., HKN PPRC2GN-G.... HKN PPRC3GN-
G
ATTENTION! The product shall be connected to the mains via the automatic circuit
breaker of combined protection with tripping current Ip=6A and via differential current relay
In=16A, Id=30mA.
Table mains plug shall be connected to the outlet with grounding pin. Table
connection using extension cords either without grounding wire or with the wire cross section
less than 1 mm 2 is prohibited.
ATTENTION! In case of the power cord damage it can be replaced only by either the
service (repair) department or similar qualified entity.
In case of non-observance of the specified requirements the manufacturer does not
take any responsibility for electrical safety.
In case of any signs of abnormal operation of refrigerating unit or electrical failures
(damage of wires insulation, break of grounding wire, etc.), the operating personnel shall
immediately unplug the table and call for mechanical specialist.
PERSONNEL INVOLVED IN THE TABLE OPERATION ARE ABSOLUTELY
PROHIBITED TO PERFORM REPAIR AND ADJUSTMENT OF THE REFRIGERATING
UNIT.
ATTENTION! Dismantling and depressurization of the refrigerating system components
shall be done only after discharge of cooling agent to special tank without its leakage to the
atmosphere.
3.3 TABLE INSTALLATION
22