ACCESSORIES DISASSEMBLY
BACKING PAD
- Unscrew backing pad (9) mounting screw using the allen
wrench (10).
ABRASIVE PAPER
- Used discs can be removed by simply tearing them off;
- new velcro discs are mounted by simply pressing them into the
pad, making sure that the holes cut in the paper disc coincide
with those in the pad.
DUST BAG
Remove used dust bag. Install new dust bag according to the
accessories mounting instructions.
ALLOWED ACCESSORIES
ER123TE - ER125TE
Ø 125 mm velcro abrasive paper discs with dust extraction holes.
ER153TE - ER155TE
Ø 150 mm velcro abrasive paper discs with dust extraction holes.
NOISE EMISSION VALUES
Detected noise emission values comply with the following
directives:
EN 60745-1
SOUND PRESSURE LEVEL
SOUND POWER LEVEL
UNCERTAINTY
SOUND PRESSURE LEVEL
SOUND POWER LEVEL
UNCERTAINTY
Use ear protection!
VIBRATION EMESSION VALUES
Detected vibration emission values comply with the standard
EN 60745-1
3 AXIS VIBRATION LEVEL
UNCERTAINTY
3 AXIS VIBRATION LEVEL
UNCERTAINTY
Displayed emission values are comparative and are to be
employed for a provisional assessment of the operator's risk
exposure during the work period. Appropriate evaluation of
work period must also include tool's idle and stop periods.
These emission values represent the tool's main applications.
If the tool is used for other applications, with other accessories,
or if it does not undergo regular maintenance, emission values
can significantly increase during operations.
Danger! The indicate measurements refer to new power
tools. Daily usa causes the noise and vibration values
to change.
ER123TE
ER125TE
ddB(A)
74
dB(A)
85
K
3
ER153TE
ER155TE
ddB(A)
75
dB(A)
86
K
3
ER123TE
ER125TE
m/s
1.85
2
K
0.5
ER153TE
ER155TE
m/s
2.0
2
K
0.5
MAINTENANCE
All maintenance operations are carried out with the power
supply disconnected.
At the end of each work session, or when required, remove any
dust from the body of the tool using a jet of compressed air,
paying particular attention to the motor ventilation slots.
No other maintenance operations must be undertaken by
the user.
Maintenance and cleaning of the inner parts, like brushes, ball
bearings, gears etc. or others, must be carried out only by an
authorized customer-service workshop.
DISPOSAL (WEEE Directive)
At the end of its useful life, the product, pursuant to
European Directive 2002/96/CE (WEEE) + 2003/108/
CE and its implementation in national law, must not be released
into the environment or thrown away as domestic waste, but
must be disposed of at authorised recycling centres (contact
the relevant local authorities for a list of places where the
product may be disposed of according to the law). Disposing
of the product correctly contributes to protecting human health
and safeguarding the environment.
Any illegitimate disposal of the product will be punishable by
law.
CONFORMITY DECLARATION
We declare on our responsibility that the represented tool is in
conformity with the directives:
74
2006/42/CE, 2006/95/CE, 2004/108/CE, 2011/65/CE.
85
The tests have been carried out in accordance with standard:
3
EN 60745-1: 2010, EN 60745-2-4: 2009 + A1: 2011;
EN 55014-1: 2006 + A1: 2009 + A2: 2011;
75
EN 55014-2: 1997 + A1: 2001 + A2: 2008;
86
EN 61000-3-2: 2006 + A1: 2009 + A2: 2009;
3
EN 61000-3-3 :2008;
EN 62233: 2008.
THE PRESIDENT
G. Valentini
Technical file at:
2.0
RUPES SpA
0.5
Via Marconi, 3A
20080 - Vermezzo (MI) - Italy
2.15
0.5
S.p.A
Vermezzo (MI), 31/05/2013
7