Conformity Declaration - Rupes TA531A Instrucciones De Uso Y Manutención

No other maintenance operations must be undertaken by the user.
Maintenance and cleaning of the inner parts, must be carried out
only by an authorized customer-service workshop.
INFORMATOIN NOISE / MEAN ACCELERATION VALUE
The tools are suppressed in accordance for the prevention and
elimination of radiodisturbances measured in accordance with
standard:
UNI EN ISO 15744 - EN ISO 28927.
Sound pressure level / Sound power level
L PA L WA
dB(A)
TA531A 86
TA551A 87
TA562A 88
DANGER The indicate measurements refer to new power
tools.Daily usa causes the noise and vibration values to
change.
Displayed emission values are comparative and are to be
employed fora provisional assessment of the operator's risk
exposure during the work period.Appropriate evaluation of work
period must also include tool's idle and stopperiods. These
emission values represent the tool's main applications. If the tool
is used for other applications, with other accessories, or if it does
notundergo regular maintenance, emission values can
significantly increaseduring operations.
Use hearing protection!
DISPOSAL
The product, when it reaches the end of its life, must not be di-
spersed in theenvironment or thrown away as household waste. It
must be disposed atauthorized recycling centres (contact your lo-
cal authorities to know where todispose of the product according
to the law). The correct disposal of the productcontributes to the
health and preservation of the environment.Illegal disposal of the
product will entail penalties against the offenders.Disposing of
3 axis vibration level
Uncertainty a h
m/s
97 3 3.65
98 3 4.25
99 3 4.34
the product correctly contributes to protecting human health and-
safeguarding the environment. Any illegitimate disposal of the
product will bepunishable by law.

CONFORMITY DECLARATION

We declare on our responsibility that the hand-held power tool, which is
mentioned in the present operating manual, is in conformity with the
Essential Requirements of Safety of the following Directive:
2006/42/CE Macchine
Uncertainty
he tests have been carried out in accordance with following Standards:
2
UNI EN ISO 11148-8 - UNI EN ISO 15744 - UNI EN ISO 28927
1.55
1.55
1.55
Technical file at:
RUPES S.p.A.
Via Marconi, 3A
20080 VERMEZZO (Mi) - Italy
Vermezzo (MI), 03/02/2014
S.p.A
IL PRESIDENTE
G. Valentini
11