Kenwood SB050 Serie Manual De Instrucciones página 4

before using for the first time
Wash the parts: see 'care &
cleaning'.
key
blade assembly
dispensing lid x 2
travel mug x 2
power unit
speed control
to use your blender
1 Add ice or frozen ingredients to
the mug .
This includes frozen fruit, frozen
yoghurt, ice cream or ice. These
can be added up to the level
marked 'max frozen ingredients'.
2 Add liquid ingredients to the mug.
This includes fruit (not frozen),
fresh yoghurt, milk and fruit juices.
These can be placed into the mug
to the level marked 'max capacity'.
3 Hold the underside of the blade
unit and lower it onto the mug,
blades down – turn clockwise to
lock .
4 Shake to disperse the ingredients.
5 To fit the assembled mug to the
power unit, turn the mug upside
down and line up the tabs on the
mug with the grooves in the power
unit and then turn clockwise until a
positive click is heard
6 Select the required speed.
When blending recipes that include
frozen ingredients turn the speed
control to 'low' for 5 seconds to
start the mixing process, then turn
the speed control to 'high'.
Allow the ingredients to blend until
smooth.
7 When the desired consistency is
reached, turn the speed control to
the 'off' position. Turn the mug
anticlockwise to release it from the
power unit.
8 Turn the mug the other way up
and unscrew the blade assembly.
9 Fit and lock the lid by turning
clockwise.
.
4
When you want to drink, simply flip
open the lid cover and clip into
position . The drink can be
consumed straight from the mug.
hints & tips
Note that when the mug is filled to
max capacity (500ml), this is
approximately two servings.
If you do not intend to consume
your drink immediately, keep it
refrigerated.
Ensure your drink is thin enough to
be able to drink from the
dispensing lid. To make a thinner
drink add more liquid.
Once your drink has reached the
desired consistency, you can use
the pulse 'P' to ensure all
ingredients are thoroughly
blended. Use the pulse 'P' to
operate the power unit in a start
stop action to control the texture
of your drink.
After blending, some drinks may
not be completely smooth due to
seeds or the fibrous nature of
ingredients.
Some drinks may separate on
standing, therefore it is best to
drink them straight away.
Separated drinks should be stirred
before drinking.
important
Never blend dry ingredients (e.g.
spices, nuts) or run the Blender
empty.
Do not use the Blender as a
storage container whilst on the
power unit.
Some liquids increase in volume
and froth during blending e.g. milk,
so do not overfill and ensure the
blade assembly is correctly fitted.
To ensure long life of your Blender,
never run it continuously for longer
than 30 seconds.
Never blend food that has formed
a solid mass during freezing, break
it up before adding to the mug.
Never blend more than the max
capacities marked on the mug.
When the dispensing lid is fitted
always keep the travel mug
upright.