Checking For Leaks - Glacier bay FP4A0052BNV Guía De Uso Y Cuidado

Installation (continued)
9
Connecting water supply lines
Connect and tighten the water supply line nuts
(1) by using an adjustable wrench.
Ensure the supply lines are not being kinked
during installation and note the red line is for
hot and blue line is for cold. When attaching the
flexible hoses, ensure there is no significant
twisting or deformation; Do not bend into a V
or L shape; Do not use if there are any visible
signs of damages.
RED
LINE
1
HOT
COLD
11

Checking for leaks

Remove the spray head (B) from the sprayer hose
(J) and hold the sprayer hose (J) tightly to prevent it
from retracting.
Turn on both water supplies and check all of the
water connections for leaks.
If you discover any leaks, check the
connections to ensure they are installed properly.
Run the water for approximately 1 minute to
flush the lines.
Reattach the spray head (B).
BLUE
LINE
F
1
1
10
Attaching the weight
Locate the lowest point on the sprayer hose (J)
and attach the rubber weight (C) to cover the
weight locating sticker on the sprayer hose (J).
Use a Phillips screwdriver to secure.
Pull the spray head (B) away from the faucet
body (A) to test if the movement is unhindered.
B
8
Weight
Locating
Sticker
J
C
J