Tele Radio T60 Manual De Instrucciones página 193

SUPPLEMENT FOR THE 460 SYSTEM
T60TX-15DML*
Type 401RVL9 and 403RVL9 transmitters with knob 1-10:
1. Check that the transmitter's system switch (A) is in position 1 (OFF).
2. Check that code switch (B) 9 is in the 0 (zero) position.
3. Set code switch 10 to either the minus or plus position depending on
whether you are using A or B coding on the old transmitter (robust
transmitter).
4. Set a code on the transmitter's 4 first switches (code switches 1-4)
identical to the receiver's (code switches 5-8 not used).
5.Check that the relay switches when one of the transmitter buttons is
pressed.The numbers on the transmitter display correspond to the
knob. Press a number followed by the transmit button and verify that
the corresponding relay switches. See code table 1-10,Appendix A.
* Transmitter T60TX-15DML in the T60 system is compatible with
transmitter Type 401RVL9 and 403RVL9 in the 460 system.
Type 401RVL9 and 403RVL9 with knob 0-15:
1. Check that the transmitter's system switch (A) is in position 1 (OFF).
2. Check that code switch (B) 9 is in the - (minus) position.
3. Set code switch 10 to either the minus or plus position depending on
whether you are using A or B coding on the old transmitter (robust
transmitter).
4. Set a code on the transmitter's 4 first switches (code switches 1-4)
identical to the receiver's (code switches 5-8 not used).
5. Check that the relay switches when one of the transmitter buttons is
pressed.
See code table 0-15,Appendix B.
(A)
1 2 3
ON
+
0
1
(B)
4 5 6 7 8 9 1 0
193