Tele Radio T60 Manual De Instrucciones página 171

4. Press the required door number button (0-999) and any function but-
ton (up, stop, down) on the transmitter.
- The red LED flashes three times.
5. Check that the relay is actuated when one of the transmitter's buttons
is pressed again.
T60TX-0XSHL/-SOL/-STL AND T60RX-03ADL
1.Check that the transmitter's system switch (A) is in the ON
position.
2.Set your own code on the transmitter's code switch (B) 1-10.
3.Press the self-instruction button (C) on the receiver.
-The red LED comes on (programming mode 6 sec).
4.If buttons 1-3 are pressed, the relays in the receiver will func-
tion as buttons 1-3. If buttons 4-6 are pressed, the relays will
function as buttons 4-6 etc.
5.Press the required function button (1-6) on the transmitter.
- The red LED flashes three times.
6.Check that the relay is actuated when the same function
button is pressed again.
(B)
(A)
1 2 3 1 2 3
1 2 3 4 5 6 7 8 9 1 0
ON
+
0
1
0 0
4 4 5 6 7 8 9 1 5 6 7 8 9 1
(C)
1 2 3
1 2 2 3
4 5 6
171