Tele Radio T60 Manual De Instrucciones página 166

2. Confirm using the select button. Red diode above relay 1 lights.
3. Select using the select button whether the relay should have a
changeover function or not.The YELLOW diode lights when the
latched function is activated.
4. Move to the other relays by using the function button and select
whether they should have a momentary or latched function using the
select button. Programming is complete when all the relays have been
processed.
The YELLOW diode (7) starts to flash when one or more relays have a
latched function.
PROGRAMMING THE INTERLOCK FUNCTION
It is possible to select the following interlocking options:
Interlocking between relays 1 and 2
Interlocking between relays 3 and 4
Interlocking: between relays 5 and 6 (Robust receiver)
Interlocking: between relays 7 and 8 (Robust receiver)
1. Select the programming option "interlocking function" (GREEN diode)
using the function button.
2. Confirm using the select button.The red diodes above relays 1 and 2
light.
3. Use the select button to select whether interlocking should be active
or not.The GREEN diode lights when interlocking is active.
4. Move to the other relay-pairs using the function button and select
using the select button whether interlocking should be active or not.
Programming is complete when all the relay pairs have been processed.
The GREEN diode (no. 8) starts to flash when the interlocking function
has been activated.
It is possible to effect interlocking between functions other than those
above by programming the code for individual transmitter buttons on indi-
vidual relays (see self-instruction of code). Example:When the transmitter
buttons 1 respective 3 are programmed to relay 1 respective relay 2 you
can practically bring about interlocking between function 1 and 3.
166