System switch (A1):
With (A1) in the ON position, the transmitter communicates with system
T60, and in position 1 (OFF) it communicates with system 460.When
resetting, the transmitter must be switched off.
Mode selector (A2):
(only T60TX-0xERL & T60TX-04EDL)
With (A2) in the ON position, continuous transmission is activated. In
position 1 (OFF) there is normal transmission.When resetting, the trans-
mitter must be switched off. For continuous transmission, the stop switch
must be pulled out and buttons 1 and 2 must be pressed for at least 0,5 s.
In order to interrupt continuous transmission, the stop switch must be
pressed.
With (A2) in the OFF position, the stop switch operates as a switch.
161